USB Camera Connect EasyCap or UVC devices for recording and streaming video/audio

***Pro version offers some extra features in General Settings and without ads**

Using USB 3.0 HDMI capture card: https://youtu.be/WkmuyfwKVrs

Using UVC H.264 device: https://youtu.be/j-71QMNuDr0

RTSP real-time broadcast: https://youtu.be/-Qzc0RSDerg

RTMP live stream: https://youtu.be/S5Bc1r57CUU

Picture in picture: https://youtu.be/Mbturdxyi5c

VR/FPV View: https://youtu.be/zEqBXLNFnE0

Show video on lock screen: https://youtu.be/Hdf2H_YusO

Tip:

Supports the following devices:

1) UVC WebCam with microphone or external USB audio input (supports H.264, H.265, HEVC, MJPG, YUY2, P010, NV12 and so on)

2) UVC video recorder with audio input or external USB audio input (up to 4K via HDMI, supports H.264, H.265, HEVC, MJPG, YUY2, P010, NV12 and so on, supports progressive and interlaced video )

3) EasyCap including audio with UTV007 / HTV600 / HTV800 chipsets (VID_1B71&PID_3002)

4) EasyCap including audio with STK1160 + SAA7113/GM7113 + AC97 chipsets (48kHz audio stereo version VID_05E1&PID_0408)

5) EasyCap including audio com7upDown STK1160 + SAA7113/GM7113 (8kHz audio mono version VID_05E1&PID_0408)

6) EasyCap including audio with EM2860 + SAA7113/GM7113 + AC97 chipsets (VID_EB1A&PID_2861)

7) EasyCap including audio com chipsets SMI2021 + SAA7113/GM7113 + ES7240/CS5340 (VID_1C88&PID_0007, PID_003C, PID_003D, PID_003E, PID_003F, PID_1001)

Click the USB icon on the toolbar to open the Device dialog box to open the device if the system cannot detect your device.

Change the video standard (PAL/NTSC/SECAM) if the video freezes when using EasyCap.

Please use a good quality OTG cable and ensure the power supply. Some devices may need to connect the HUB to enhanced USB signals to function properly, e.g. Elgato Cam link, ezcap Video Grabber.

Using HEVC for video recording/streaming requires Android 5.0 or higher, and the device must support the HEVC codec.

"USB Camera" can allow your Android device to connect to a USB WebCam or video capture card via USB-OTG. You can record video or capture snapshots, OR turn your phone into a wireless IP camera via built-in RTSP and HTTP server for security monitoring WITH two-way audio support, you can use your browser to view, of course, include the "IP Camera" app ".

"USB Camera" can mix USB audio with a built-in microphone and output.

"USB Camera" can send the video and audio to the RTMP/SRT live media server and use it for live broadcast over the network. It supports RTMPS security protocol and SRT protocol and can also send the media to multiple media servers at the same time. It also supports HEVC over RTMP and can be used for YouTube live currently.

"USB Camera" supports side-by-side view (SBS) and can work with FPV goggles

"USB Camera" can add timestamp, GPS, speed and other information to video frames during recording, and can use your Bluetooth headset or headset to capture snapshots and record videos. It also supports WebCam snap button.

"USB Camera" supports loop recording. Can set auto segment when recording and automatically delete old video files when there is not enough storage. "USB Camera" can be used as "Dash Cam"

The USB camera can seamlessly switch between foreground and background. Just press 'Enter background' in the menu. Recording will not be interrupted during switching!

It supports automatic video recording based on motion detection, and the video recording can be uploaded to the FTP server automatically and notify you by email!

Two-way audio requires IP camera app, you can get it from https://play.google.com/store/apps/details?id=com.shenyaocn.android.WebCam

IMPORTANT! On Android 9 and above, camera permission is required to gain full access to the USB video device. Don't worry, the app doesn't contain any function/code to visit the built-in camera because it's unnecessary.

This is a userspace driver, so it is only used for the application. Android does not allow installing the kernel driver, so it cannot be used for third-party applications.

Fortune OX